Surface Preparation
The key to any quality finish is all in the preparation so take your time when preparing the surface you are working with. All surfaces should be clean, dry and free from grease and loose flaking materials. Any existing rust, millscale or loose material should be removed from the surface of the material before applying this primer.
Application
Johnstone's paints are made to the highest standard and are ready to use straight from the tin. For the best results apply using a brush which is fully loaded. Apply evenly and avoid overspreading. Apply a minimum of two coats under normal conditions, and apply liberally to achieve the best results.
Drying time
Depending on the nature & porosity of the surface, allow 4 hours drying between coats under normal conditions.
- Touch dry: Within 1 - 2 Hours
- Completely dry: Within 24 Hours
Cleaning
Remove as much product as possible from application equipment before cleaning. Clean all equipment immediately after using white spirit or turpentine substitute.
Coverage Guide
750ml of Johnstone's Specialty Any Surface Primer will cover approximately 8m² depending on the nature & porosity of the surface.
Storage
Replace lid onto the tin firmly and store in cool dry conditions between + 5°C and +25°C. Storage outside these conditions will dramatically reduce shelf life and may affect the product itself.