- Excellent water resistance
- Dries brilliant white
- Contains Mould Shield - prevents mould growth
- Contains SteriTouch - Antibacterial protection
- Ready mixed formula - no mixing, no mess
- Apply straight from the tube
Areas For Use
- Kitchen/Bathroom walls
- Shower areas
- Wet Rooms
- Allow to fully dry before exposure to water.
- Do not use over epoxy grout.
Surfaces must be clean, dry; dust free and sound. Remove any old mould with a fungicidal wash prior to application and allow to dry. Replace any damaged, loose or cracked grouting by raking and re-grouting then allowing to dry.
Always test a small inconspicuous area for compatibility prior to full scale application. Remove cap and squeeze the Grout Reviver tube until product is expelled. Continue squeezing and apply to grout lines in a zig zag motion ensuring even coverage and working well into existing grout. Allow to dry for 3-4 hours then remove any excess product from tiles with a damp cloth or sponge. Any residue still remaining on tiles can easily be removed by moistening; leaving for 15 minutes then removing as above. A second application may be necessary for badly stained areas; after first coat is dry (3-4hours). After removal of residues; polish tiles with a clean dry cloth.
Avoid wetting tiles for 24 hours after application (longer in cold poorly ventilated/humid conditions). Rinse applicator sponge in warm water after use and replace cap to enable product to be used again. Wash hands with warm water and soap after use.
Store at moderate temperatures, protect from wash.
12 months in original containers at stated storage temperatures