EverBuild One Strike Filler - 450ml Tub - In-Excess Direct

EverBuild One Strike Filler - 450ml Tub

This revolutionary one strike filler from EverBuild fills most holes and cracks, even deep holes, in just one quick application. No need for secondary filling to level off as One Strike will not shrink, sag or crack. One Strike Filler finishes smooth, requiring little or no sanding and can be ready to paint in approximately 30 minutes.

  • Contents: 450ml
  • 30 Minute drying time
  • Fills in one go
  • Lightweight
  • Will not shrink or crack
Technical Data & Application

Benefits

  • Fills in one go- No need to build up layers of filler - fills up to 75mm deep in one application
  • Easy to use - lightweight paste is incredibly easy to apply
  • No sanding required - finishes to a smooth surface
  • No sagging - the lightweight properties of One Strike prevent sagging even on ceilings
  • Non-shrink - will not shrink back whilst drying
  • Quick drying - ready to paint/paper in just 30 minutes
  • Overpaintable with most solvent based and emulsion paints
  • Overstainable
  • Internal/external use
  • Dries brilliant white

Areas For Use

  • Fills gaps and holes in:
    • Plaster
    • Brick
    • Stone
    • Wood
    • Render

Limitations

  • Do not use to fill plastic or metals.
  • Do not apply when rain is imminent (external use)
  • Do not apply in temperatures (ambient and surface) below 5 C

Surface Preparation
All surfaces must be clean, dry, free from dust, grease and other contamination

Application
Apply direct from tub with spatula/spreader. Smooth over surface and allow to dry. Sanding is not normally required although the product may be sanded if required.

Drying Times

  • Touch Dry: 15 minutes
  • Through Hard: 2 hours
  • Sandable: 30 minutes
  • Overpaintable: 2 hours

Storage
Store at moderate temperatures

Shelf Life
24 months in original container at stated storage temperatures


Maybe you'll be interested in...