Bartoline TX10 Non-flammable Paint & Varnish Stripper - 500ml

Save £2.04

£3.95 £5.99


Bartoline TX10 Paint and Varnish Stripper is a highly effective non-Methylene Chloride stripper ideal for use by inexperienced DIYers as well as professional users. The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers at a time.
  • Size of bottle: 500ml
  • Biodegradable
  • Minimal evaporation
  • Non-flammable
  • 1 Litre is sufficient to strip a surface area of approximately 1 square metre
  • Highly effective non Methylene Chloride formulation
  • Clings 100% to vertical surfaces - no drips or runs, hence no waste
  • For use by novice DIYers and serious professionals
Technical Data & Application


    Read label fully before use. Wear protective gloves. Protect floor coverings, textiles and vinyl materials. Shake container well before use.. 


    Pour a quantity of Bartoline TX10 Paint and Varnish Stripper into a suitable container. Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per square metre, onto the surface to be stripped, with a suitable brush. Leave for approximately 1 hour and apply a second coat. For areas where there are less than 5 layers of paint or varnish, a second coat may not be necessary. Once the stripper has softened the paint, scrape off, leaving surface as clean as possible. Repeat process if necessary.


    Immediately washed hands with soapy water after use.

      Customers that purchased these also viewed...

      Recently viewed