Surface Preparation
The surfaces to be glued must be clean, dry and free from dust, grease and other contaminants.
Application
All surfaces to be sealed must be sound, clean, dry and totally dust free in order for the bonding adhesive to work.
- Cut the tip of the cartridge taking care not to damage the thread
- Apply nozzle and cut cleanly at an angle of 45 degrees
- Apply using a standard sealant gun
Double Stick Method: Apply adhesive as above. Immediately press firmly into position to ensure adequate transfer of the adhesive and then pull away to affect the adhesive transfer. Allow adhesive to dry apart for 5 minutes before pressing finally into position. Allow to dry for 24 hours before subjecting to traffic. • Tools and excess adhesive can be cleaned using white spirits or turpentine substitute.
Storage
Store in cool dry conditions between + 5 and +25°C. Storage outside these conditions will dramatically reduce shelf life.
Shelf Life
12 months from date of manufacture in unopened containers