Description
- Suitable for Sheet metal, Glass Handling, Automotive Industry, Manufacturing & Assembly
- Performance levels EN 388
- Abrasion - Level 1
- Blade Cut - Level 5
- Tear - Level 4
- Puncture - Level 2
EN 388 Details
Gloves giving protection from mechanical risks
Protection against mechanical hazards is expressed by a pictogram followed by five numbers (performance levels), each representing test performance against a specific hazard. The higher the number, the better the glove.
Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 5 depending on how many revolutions are required to make a hole in the material.
Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
Tear resistance
Based on the amount of force required to tear the sample.
The protection factor is then indicated on a scale from 1 to 5.
Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 5.
Please note: You will receive one outer and one inner glove